MANUFACTURING

Glass cutting

Even though today's technology enables completely automatic cutting process of all possible shapes of glass, manual work is still required.

more...


Glass grinding

We grind the edges of glass in various qualities according to different requirements (chamfering, rough grinding, grinding without polishing, grinding with polishing).

We either grind the edges mechanically with the use of designated machines or by hand using the variety of hand tools.

more...


Drilling of glass

Drilling is the process of making holes of different cross-sections ranging from a minimum of 3mm in diameter to a maximum of 200mm in diameter as well as the production of simple cut-outs, presumably for locks, hinges etc.

more...


Hardening of glass

The process of hardening is carried out in two phases: heating of glass to the softening temperature is followed by rapid cooling. The pre-treatment of glass (cutting, grinding, drilling) must be performed before the hardening procedure.

more...


Lacquering and screen printing of glass

For surface colouring of glass two procedures are used – colouring with screen printing and colouring with cylinder. Screen printing enables us to print various designs and patterns on the glass.

more...


Sandblasting of glass

We can sandblast various designs – from simple to complex patterns, or the entire surface area. We can also sandblast glass or mirrors, positive and negative. Sandblasted glass can be coated with a special coating which protects the design.

more...


Veneering of glass

Our recent acquisition is the new one-sided veneering machine by which we increased the manufacturing capacities of veneered glass. We are also able to veneer irregular shapes of glass.

more...


CNC processing of glass

With the help of CNC machines, glass plates can be freely shaped according to client's wishes. This is enabled by computerized data processing and fully automated operation of the CNC machine.

more...


Gluing of glass

By gluing one or more layers of glass we obtain a safety glass whose advantage is that it remains together in case of breakage. The glass can be glued with transparent or milky film for the matte effect. The maximum dimension of glass that can be glued together is 3600mm x 2100mm.

more...


Glass bending

We are one of the few companies in Slovenia that offers curved glass. We bend glass by the help of molds at high temperature. We offer a wide selection of different molds up to 2800mm in width and 1800mm in length.

more...


UV gluing

UV (ultraviolet) gluing is the process of bonding glass with the help of UV adhesives. The adhesive contains the photoreceptors that react under the UV light and harden the adhesive.

more...


Fragmentation testing

The company is committed to quality of its products; therefore, it is necessary to regularly test the quality of the tempered glass. We test the adequacy of glass according to EN 12150 using the optical reader Cullet Scanner.

more...